Địa chỉ: Số 12 ngõ 942 đường Láng, quận Đống Đa, TP Hà Nội
Tel : 024.8582.2159 - Fax: 024.3791.7621 Email: sales@lavme.vn Website: lavme.vn
Call for advice on the most suitable configuration:
CÔNG TY CỔ PHẦN HGROUP
Địa chỉ : Số 12/942, đường Láng, quận Đống Đa, Hà Nội
Tel : 024.8582.2159 – Fax : 024.3791.7621
Website : lavme.vn – Email : sales@lavme.vn
Contact : Kỹ sư Hứa Anh Tuấn
The RIP600P handheld ultrasonic flowmeter is designed to work with clamp-on transducers to enable the flow of a liquid within a closed pipe to be measured accurately without needing to insert any mechanical parts through the pipe wall or protrude into the flow system.
Using ultrasonic transit time techniques, it is controlled by a micro-processor system which contains a wide range of data that enables it to be used with pipes with an outside diameter ranging from 15mm up to 6000mm (depending on model) and constructed of almost any material. The instrument will also operate over a wide range of fluid temperatures
High Accuracy: | Accuracy better than 1% |
Measure Range | Measurement range from DN15~DN6000mm |
Rechargeable Power Supply | Built-in high-capacity NiMH rechargeable batteries will last more than 10 hours(Fully charged). |
Non invasion measurement | Can achieve measurement with clamp on sensors |
Data Storage | 32K BIT built-in data storage,can store two thousand rows of data |
LCD display | LCD dispaly can display the instant flow,total flow,flow velocity and working condition |
APPLICATION
MEASUREMENT CONPOSITION
• Different transducer for temperature
• Easy to install and no need to cut off the flow, • no pressure loss • Different transducer from DN15÷700 mm • Different transducer for temperature –30°C…+160°C |
|
• Reduces installation time,improve installation accuracy
• Easy installation,no need cut the flow ,no pressure loss • Easy to install and no need to cut off the flow, • no pressure loss • Different transducer from DN15÷700 mm • Different transducer for temperature –30°C…+160°C |
Ultrasonic flow meters using the doppler principle requires that the liquid be either solids-bearing or aerated at a minimum of 100 ppm. The product utilizes a single, hand-held transducer which is placed on the outside of metal or plastic pipe
Contact
The Dynasonics TFX Ultra Ultrasonic Flow Meter is a clamp-on ultrasonic flow and energy meter that provides accurate and repeatable measurements for full pipe liquid applications such as cooling lines, raw sewage flows, water distribution and processes where system shutdown is impossible.
Contact
Đánh giá RIP600P handheld ultrasonic flowmeter